Spoolers and Winders

Equipped with an adjustable counter (6 numbers) with automatic-stop as well as fast clamping equipment for standard spools. A length counter (meter) is available as an option, as is a wire break switch. The take up is also available equipped with two or three spool seats and table framework on request.

Spool Ø :  80 - 250 mm
Wire Ø :  0,02 - 1 mm
Traverse :  Uhing Type Kinemax
Traverse distance :  max. 200 mm
Three phase motor with frequency converter :  1 - 1,9 kW
Weight of machine :  ca. 65 kg

Motorized and built as a modulus design unit with transparent shielding and working-signal light. Winding speed is controlled by dancer and adapted to the next production process. Tension is adjusted by spring loading of the dancer. Also available with table framework.

Ø Cu/Al wire :  0,014 - 0,3 mm
Wire with tensile strength
more than 350 N/mm :  0,01 - 0,15 mm
RPM of spindle :  0 - 1500 min
Traverse :  Uhing Type Kinemax
Traverse distance :  max. 160 mm
Three phase motor with frequency converter :  1,2 kW, or as required

Equipped with an adjustable counter (6 numbers), with automatic-stop and length counter (meter) as an option. Collapsible mandrel when taking off the outer flange. Also available with suitable table framework.

Coil Ø :  100 - 335 mm
Max. coil weight :  ca. 30kg
Traverse :  Uhing Type RG20
Traverse distance :  max. 140 mm
RPM of spindle :  0 - 700 minˉ¹
Three phase motor with frequency converter :  2 kW
Weight of machine :  ca. 100 kg

Single or double spool and available with protection grid.

Three phase motor with frequency converter :  2 - 4 kW
RPM of spindle :  0-5000 min
Ø wire :  0,3-11 mm
Max. weight of spool :  50 kg
Max. traverse distance :  160 mm
Max. weight of Double Head Spooler :
ca. 430 kg

Spool Ø :  560-630, or 630-800 mm
RPM of spindle :  0 - 450 min
Three phase motor with frequency converter :  3 - 6 kW
Traverse :  Uhing Type RG30
Max. traverse distance :  530 mm
Max. Spool length :  620 mm

Spool Ø :  630 - 900 mm
Three phase motor with frequency converter :  3 - 7 kW
Traverse :  Uhing Type RG30
RPM of spindle : ca. 0 - 500 minˉ¹
Ø winding material :  0,3 - 20 mm
Max. weight of spool :  900 kg
Max. traverse distance :  570 mm
Max. spool length :  690 mm

Spool Ø :  900 - 1250 mm
Three phase motor with frequency converter :  3 - 10 kW
Traverse :  Uhing Type RG40
RPM of spindle :  ca. 0 - 300 min
Ø of winding material :  0,8 - 25 mm
Max. weight of spool :  1600 kg
Max. Traverse distance :  850 mm
Max. Spool length :  950 mm

Flyer payoff with hysteresis brake and wire straightener for tension build up. Additional equipment with dancer accumulator. This type of rewinding system is used to wind up wires from coils onto spools for further fabrication or for customer sales. Materials that can be used are copper, steel, aluminium or brass with wire diameter of max. approx. 3 mm. The winder is optional equipped with a presetable counter for automatic stop or with detection of full spool by sensor.

Spooler with wire traverse and AC-motor controlled by dancer. This type of rewinding system is used to wind up wires from coils onto spools for further fabrication or for customer sales.  Materials that can be used are copper, steel, aluminium or brass with wire diameter of max. approx. 3 mm. The winder is optional equipped with a presetable counter for automatic stop or with detection of full spool by sensor.

Also Available...

Flyers and Payoffs Index
Machinery Products Index