 |
F21G-Gfk Series
Flyer with ultrasonic control for constant tension
A magnetic particle brake is mounted on the flyer of the
payoff and reduces the torque as the spool becomes
empty. To achieve this an ultrasonic sensor detects the increasing
distance to the wire surface and feeds back to an electronic
control unit which reduces the current to the flyer brake. This system
ensures constant tension of the wire. Periodic variations of the tension are
equalized by the tension compensator arm.
Flange Ø : 500-800mm
Multiwire : 7x0,15 - 8x0,3mm
Ø Cu-, Al wire : 0,15-0,9mm
Ø Steelwire hard : max. 0,3mm
Ø Steelwire soft : max. 0,5mm
Wire speed max. : 800 m/min
Wire tension : 5N - 18N |
 |
F26G-2M Series
With tension control by a dancer accumulator
This unit is equipped with a tension control via a dancer
accumulator. By moving a potentiometer the dancer controls the braking torque
of the magnetic particle brake connected to the payoff flyer.
The tension, which remains constant over the complete diameter range, is
set by modifying the spring adjustment at the dancer.
Flange Ø : 630-800mm
Multiwire : 8 x 0,55mm
Ø Cu-, Al wire : 0,6-1,9mm
Ø Steelwire hard : max. 0,3mm
Ø Steelwire soft : max. 1,5mm
Wire speed max. : 300 m/min
Wire tension : 6N - 49N |
 |
F21G-Gfk (HAT) Series
Driven flyer payoff
This Payoff is equipped with a glass fibre flyer arm that
is driven by an AC-motor. Control of the motor is via a
frequency inverter. The unit is especially suitable for higher wire
tensions and high speed spooling in start/stop use. It works very
smoothly and with precision constant tension.
Flange Ø : 560-800mm
Multiwire : 8 x 0,35mm
Ø Cu-, Al wire : 0,1-0,9mm
Ø Steelwire hard : max. 0,3mm
Ø Steelwire soft : max. 0,6mm
Wire speed max. : 600 m/min
Wire tension : 1N - 18N |
 |
F26G-2M Series / F46G-N Series
Driven flyer payoff
This Payoff is equipped with a glass fibre flyer arm that
is driven by an AC-motor. Control of the motor is via a
frequency inverter. The unit is especially suitable for higher wire
tensions and high speed spooling in start/stop use. It works very
smoothly and with precision constant tension.
Flange Ø : 560-800mm
Multiwire : 8 x 0,4mm
Ø Cu-, Al wire : 0,1-1,4mm
Ø Steelwire hard : max. 0,6mm
Ø Steelwire soft : max. 1mm
Wire speed max. : 300 m/min
Wire tension : 1N - 40N |
