Tangential Payoffs

Built as a complete unit with transparent shielding and working-signal light, the winding speed is controlled by dancer arm and adapted to the following work process. The tension is adjusted by spring loading of the dancer arm.

Flange Ø :  80-200mm
Ø Cu-, Al wire :  0,014-0,3mm
Wires with tensile strength more than 350N/mm² :  0,01-0,15mm 
Traverse distance :  max. 160mm
RPM of spindle :  0-1500minˉ¹
AC-motor with frequency converter :  1,2kW

Equipped with an adjustable hysteresis brake for manual tension adjusting. Also there are dancer accumulators for start/stop use. The pulleys on the dancer accumulator are of steel material or of ceramic with plastic flanges dependable on the application. There are cross rollers mounted at the input of the dancers.

Flange Ø :  200-355mm
Multiwire :  3 x 0,1 - 12 x 0,25mm
Ø Cu-, Al wire :  0,3-1,9mm
Ø Steelwire hard :  max. 0,8mm
Ø Steelwire soft :  max. 1,5mm
Wire speed max. :  250 m/min
Wire tension : 4N - 18N

Equipped with an adjustable hysteresis brake for tension braking, it has a guide free payoff and an extra support for the spool shaft.

Flange Ø :  250-300mm
Multiwire :  5 x 0,1 - 12 x 0,25mm
Ø Cu-, Al wire :  0,3-1mm
Ø Steelwire hard :  max. 0,9mm
Ø Steelwire soft :  max. 1,5mm
Wire speed max. :  300 m/min
Wire tension : 4N - 18N

Equipped with a hysteresis brake to obtain soft braking. There is also a dancer accumulator, that will keep up the tension in the start/stop use. The spool is kept in position by using an EasyLock unit with axial force on the unwinding spindle.

Flange Ø :  315-500mm
Multiwire :  7 x 0,18 - 7 x 0,51mm
Ø Cu-, Al wire :  0,4-1,9mm
Ø Steelwire hard :  max. 0,9mm
Ø Steelwire soft :  max. 1,5mm
Wire speed max. :  200 m/min
Wire tension : 6N - 35N

Flange Ø :  max. 405mm
Multiwire :  7 x 0,1 - 8 x 0,32mm
Ø Cu-, Al wire :  0,3-1,2mm
Ø Steelwire hard :  max. 1mm
Ø Steelwire soft :  max. 1,6mm
Wire speed max. :  250 m/min
Wire tension : 5N - 30N

Flange Ø :  120-350mm
Ø Cu-, Al wire :  0,35-1,0mm
Ø Steelwire hard :  0,1-0,5mm
Ø Steelwire soft :  0,15-0,7mm
Wire speed max. :  max. 80 m/min
Wire tension : 0,1N - 5N

Flange Ø :  120-350mm
Ø Cu-, Al wire :  0,35-1,0mm
Ø Steelwire hard :  0,1-0,5mm
Ø Steelwire soft :  0,15-0,7mm
Wire speed max. :  max. 80 m/min
Wire tension : 0,1N - 5N

Equipped with hysteresis brakes and Easylock shaft lock system. Various pulleys, ceramic bushings as well as tungsten-carbide bushings are used depending on the wire material to be paid off.

Flange Ø :  200-560mm
Ø Cu-, Al wire :  0,6-2,5mm
Ø Steelwire hard :  max. 1,2mm
Ø Steelwire soft :  max. 1,5mm
Wire speed max. :  max. 250 m/min
Wire tension : 3N - 60N

This Payoff with 4 spool-heads is equipped with magnetic particle brakes. The advantage of this is, that the tension control can also be done with the payoff in operation. There is also a removable shaft-bearing-support for the spool shaft.

Flange Ø :  450-560mm
Ø Cu-, Al wire :  0,6-2,5mm
Ø Steelwire hard :  max. 1,2mm
Ø Steelwire soft :  max. 1,5mm
Wire speed max. :  max. 300 m/min
Wire tension : 6N - 150N

Built as a cantilever unit with hydraulic hand pump to lift the spool after it's been positioned. Dependable on the application the following dancer accumulator is used only as an accumulator or also as a control device for the payoff braking.

Flange Ø :  560-800mm
Ø Cu-, Al wire :  0,8-5,0mm
Ø Steelwire hard :  max. 3mm
Ø Steelwire soft :  max. 2mm
Wire speed max. :  max. 230 m/min
Wire tension : 8N - 200N

This Driven Tangential Payoff with tension and rpm control by sensor and frequency inverter is used to feed extrusion lines and bunching machines as well as stranding machines. The spools shaft with bearings on one side is driven by an AC synchronous motor with frequency inverter. This Payoff is also available as a double head machine.

Flange Ø :  630-800mm
Ø Cu-, Al wire :  0,35-2,6mm
Wire speed max. :  max. 350 m/min
Wire tension : 1,2N - 100N

The picture shows a Tangential Payoff with controlled braking of two spool seats. The payoff tension stays constant over all diameters by potentiometer control of the dancer that works with a magnetic particle brake.

Flange Ø :  350-560mm
Ø Cu-, Al wire :  0,6-3mm
Ø Steelwire hard :  max. 2mm
Ø Steelwire soft :  0,4-1,4mm
Wire speed max. :  max. 280 m/min
Wire tension : 6N - 90N

Also Available...

Flyers and Payoffs Index
Machinery Products Index