Tab/Clip Connection Terminal Blocks

TTEC Tab Connection Terminals offer quick connection possibility. The terminals are suited for standard 'Fast On' type lugs. Connection is a achieved by pushing the lug onto the tab blade of the terminal block. The terminal housing is designed so that the wall protrudes beyond the tab blades.

In order to provide a reliable connection, attention must be paid to the size of lug suitable for standard tab blade of size 6.3 x 0.8 mm. The design facilitates cross connection between adjacent terminal.

The TTEC CTS4U-TM Terminal for Clip Connection (Solderless) is according to DIN 41611 - Part 4. Three wires (1.5mm²) can be connected with clip on to the pin by using a special tool.

In order to provide a reliable connection from the TTEC CTS4U-TM, attention must be paid to the size of the clip which is suitable for pin of size 0.8 mm x 1.6 mm

The TTEC CDL4U-TM Double Level Terminal for Clip Connection (Solderless) is according to DIN 41611 - Part 4. Three wires (1.5mm²) can be connected with clip on to the pin by using a special tool. The terminal provides high wiring density without extension of mounting rails.

In order to provide a reliable connection from the TTEC CDL4U-TM, attention must be paid to the size of clip which is suitable for pin of size 0.8 mm x 1.6 mm


Download more information on TTEC Terminals (PDF 1.89MB)

Connection Type:  5 tab connection points, 1 tapped hole for cross connection
Wire Size:  0.5-4mm²

Connection Type:  2 screw connection, 1 tab connection at centre
Wire Size:  0.5-4mm²

Connection Type:  2 screw connection, 1 tab connection at centre
Wire Size:  0.5-4mm²

Connection Type:  1 screw connection, 1 blade for 3 0.5mm² connections
Wire Size:  0.5-4mm²

Connection Type:  2 screw connections, 2 blades for 6 0.5mm² connections
Wire Size:  0.5-4mm²

Also Available...

TTEC Terminals Index
Electrical Products Index