Distribution Blocks

Techna TTEC Compact Distribution Blocks (CDBs) are an ideal choice for a simplified distribution system. The incoming cable is secured and the screw clamp design of the block provides the outgoing connections. These provide easy connection points and ensure a perfect continuity for distribution. A protective shield shrouds the incoming connection.

Please note the following information regarding your application :
- The sum of all outgoing currents on either side should not exceed half the maximum permissible incoming current.
- The sum of all outgoing currents should not exceed the maximum permissible incoming current.
- Connection for higher outgoing currents should be done through the terminal closest to the incoming connection.


Download more information on TTEC Terminals (PDF 1.89MB)

Connection Type:  1 screw flat connection for ring lugs, screw clamp connection
Wire Size:  0.5-4/6-16mm²

Connection Type:  1 screw flat connection for ring lugs, screw clamp connection
Wire Size:  0.5-4/6-16mm²

Connection Type:  1 screw flat connection for ring lugs, screw clamp connection
Wire Size:  1.5-6/6-25mm²

Connection Type:  1 screw flat connection for ring lugs, screw clamp connection
Wire Size:  1.5-10/10-35mm²

Connection Type:  screw clamp connection
Wire Size:  0.5-4mm²

Connection Type:  screw clamp connection
Wire Size:  1.5-6mm²

Connection Type:  screw clamp connection
Wire Size:  1.5-10mm²

Also Available...

TTEC Screw Clamp Terminals Index
TTEC Terminals Index
Electrical Products Index

Download...

Download PDF (133KB)