Stud Type Terminal Blocks

High Temperature Melamine

These Stud Type Terminals are preferred for the connections that are subjected to very severe vibrations. Wire is crimped to a ring / fork type lug and is screwed on to the flat current bar in terminal. The range includes terminals for wire of size 1.5 to 35 mm². There are two types of Stud Terminals available; Screw Driver and Nut Driver Operated. Specially designed marker holding recess / rib can accommodate 'K' type, Insert type and Mounting type marking tags.

Cross connection can be achieved with the aid of side ways shorting links. The links are insulated to make them shook proof. It is recommended to use protective covers in transparent plastic because assemblies of these terminals are not fully shrouded. 


Download more information on TTEC Terminals (PDF 1.89MB)

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-4mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-10mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-16mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-10mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-16mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-35mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-10mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-16mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  1.5-16mm²

Connection Type:  2 screw flat connection for ring/fork lugs
Wire Size:  10-35mm²

Also Available...

TTEC Melamine Terminals Index
TTEC Terminals Index
Electrical Products Index