 |
Component Carrier Modules
For Field addition of electronic components like diodes, LED etc
Max. Operation Voltage: 230
Max. Current Per channel: 8A
Terminal Block Pitch: 5.08
Rated cross section: 0.5-2.5mm˛ |
 |
Diode Modules
For Polarity protection, testing lamps, arc quenching for switching of
inductive loads such as magnetic valves, DC relays
Max. Operation Voltage: 230 V ~
Diode Type: 1N4007
Max. Diode Forward Voltage: 0.8 V
Max. Diode Reverse Voltage: 1000 V
Max. Diode Current: 1 A
Max. Current Per channel: 1 A
Terminal Block Pitch: 5.08
Rated cross section: 0.5-2.5mm˛ |
 |
IDC Modules
Interface for 10 - 64 signals for adaptation of prefabricated IDC
headers to screw clamp terminals blocks
Compact Ribbon Connector Modules provide an interface between
multi wire flat cables outfitted with IDC connector and discrete wires.
The
standard modules is to interface 10 - 64 signals for conversion of
prefabricated IDC headers to screw clamp terminal block. |
 |
D-Sub Modules
Interface for 9 - 50 signals for the conversion of finished cables with
D-Sub to screw clamp terminal blocks
Operation Voltage: 250 V ~
Rated Current: 2.5 A
Terminal Block Pitch: 5.08 mm
Rated cross section: 0.5 - 2.5mm˛ |
 |
Relay Modules
For Switching of loads - 12 V to 380 V, 10 mA to 12 A
Available non-bussed, positive bussed or negative bussed,
with or without socket, and with a choice of contacts: 1 NO, 2 NO, 1 CO
or 2 CO |
 |
Fuse Module
For Protection from overloads / short circuit |
 |
Varistor Module
For
Voltage surge, spikes and over voltage from lightning and inductive
switching / electrostatic discharge |
 |
Interface Modules
For CNC machines
The new IMRE1SS16/CNC series provides connection
possibilities for both the input and output side of a PLC in a single
module. Also compatible with PLCs from Fanuc, GE, Mitsubishi, Schneider
and Siemens.
- 24 Inputs; 16 Outputs
- Contact Rating: 10A, 250VAC
- Standard Coil Voltage: 24VDC
- Relay contact terminals designed for 2.5mm/12AWG wires
- DIN rail mounting
- All relay coils fitted with a back EMF protection diode
- Relay coil status indication by red LED (on for relay energised)
- Relay type: OMRON single change over (other brands available on
request)
Module can be supplied with relay directly soldered on the PCB, without
relay, with relay base only so that relay can be plugged in at later
stage by user, or with non-standard coil voltages such as 12VDC, 48VDC. |
 |
Interface Modules
For 32 channel digital output applications
Simplifies wiring by accommodating 32 channel signals
through a flat ribbon cable connector. The module is supplied in two
parts, as the main module and it's extension module along with a 20 core
FRC cable to connect them. The module is best suited for interfacing
Allen Bradley SLC 500 PLCs.
- DIN rail mounting
- Standard coil voltage: 24VDC
- All relay coils fitted with a back EMF protection diode
- Supply voltage indication green LED (on for presence of supply)
- Relay coil status indication red LED (on for relay energised)
- Relay contact modules: 0.5-2.5mm/22-12 AWG wires
- Relay type: OMRON single change over
- Contact rating: 10A, 250VAC
Module can be supplied with relay directly soldered on the PCB, plugged
into appropriate relay socket, without relay, with relay base only so
that relay can be plugged in at later stage by user, or with 40 core
round interfacing cable available on request |
