Mounting Brackets and DIN Rails

Mounting Rails
Most of the TTEC Terminals Blocks are designed to mount on the TTEC Mounting Rails, that can be fixed easily on panel boards and equipments. They also accommodate a wide variety of control equipment such as circuit breakers. There are three types of internationally standardised TTEC Steel Mounting Rails: 'G' shaped Din 32 (Din 1), 'Ω' shaped Din 35 (Din 3) & Din 35 - 15 deep (Din 3) and Din 15 that comply with European standards EN 50 035, EN 50 022 and EN 50 045 respectively. The rails are zinc plated and chromate passivated.

All TTEC Mounting Rails are available in standard 1 m & 2 m lengths. Choice of slotted/unslotted rails in Din 32 & Din 35 types are available. TTEC Mounting Rails cut to length with holes / slots as per customer requirements can be supplied.

TTEC Mounting Rails made of steel in accordance with DIN VDE 0611 Part 3 are permissible as grounding bus bars (PE function), but do not PEN function.

Mounting Brackets
TTEC Mounting Brackets are used to elevate DIN rails away from the panel to allow components to be mounted. Rails are  installed at an angled slope to facilitate better access for wiring and improve visibility. The Brackets are zinc plated and chromate passivated and mount with two screws to any panel or flat surface.


Download more information on TTEC Terminals (PDF 1.89MB)

Dimensions:  48 x 80 x 18mm
Suitable for all mounting rails

Dimensions:  25.4/50.8/76.2 x 74 x 18mm
Suitable for all mounting rails

Dimensions:  58 x 18 x 18mm
Suitable for DIN 35 rail mounting

Dimensions:  58 x 18 x 18mm
Suitable for DIN 35 rail mounting

Dimensions:  54 x 55.5 x 6mm
Suitable for all mounting rails

Dimensions:  32 x 15 x 1.5mm
Suitable for all terminals except Micro Terminals, PCB Terminals, Multiway Terminals, Modular Terminals and CENC Terminals

Dimensions:  35 x 7.3 x 1mm
Suitable for all terminals except Micro Terminals, PCB Terminals, Multiway Terminals, Modular Terminals and CENC Terminals

Dimensions:  35 x 15 x 1.5mm
Suitable for all terminals except Micro Terminals, PCB Terminals, Multiway Terminals, Modular Terminals and CENC Terminals

Dimensions:  15 x 5 x 1mm
Suitable for micro terminals

Also Available...

TTEC Accessories Index
TTEC Terminals Index
Electrical Products Index

Download...

Download PDF (78KB)