| |
Enclosures for DIN-Rail Mounting
Seven ranges of plastic insulated enclosures and metal
enclosures, representing some of the most versatile combinations of
leading edge enclosure technology available for DIN rail mounting.
Features available
- Various connection technologies such as: solderable, Machine
solderable, plug-in card-edge connection, screw terminals, cage-clamp
terminals.
- Special colours
- Customised holes, slots and openings
- Screen-printing and laser etching
- Din-Rail mounting and surface mounting
- Dold high density terminals in small module widths
- Dold high current terminals with enclosure heat sink for power
electronics
- Low Voltage distribution range (same profile as standard MCB)
- A wide choice of accessories
Typical applications
Application will be found in virtually every area of process control,
safety systems and instrumentation, such as:
- Control and process instrumentation
- Data communications
- Field bus
- Safety modules (i.e. emergency stop systems)
- Safety gates
- Signalling systems
- Light barriers
- Lift and escalator controls
- Crane controls
- Printing and textiles
- Robotics
- Presses and stamping machines
- Rail transportation systems
- Monitoring and speed controls
- Power electronics
- Low Voltage distribution and control panels (same profile as standard
MCB) |
|
|
|
|
|
| |
 |
K 70 Series (PDF 90KB)
DIN-Rail Enclosures
Widths: 22.5, 32.5, 45, 75, 100, 150mm
Up to 32 pressure plate terminals
PCB mounting in various planes |
 |
KO 4000 Series (PDF 111KB)
DIN-Rail Enclosures
Widths: 22.5, 45, 75, 100, 150, 200mm
Connections to pcb via solder pins or card-edge connector
Screw clamp terminals
Removable terminal strips
Terminal blanking strips available
Optional integral or opaque/transparent removable front plates
Captive plus/minus screws
Many PCB mounting positions |
 |
KO 4030 Series (PDF 103KB)
DIN-Rail Enclosures
Widths: 22.5, 45, 67.5, 90mm
Up to 56 box terminals
Captive plus/minus screws
Removable terminal blocks for PCB card-edge connection
Terminal blocks with 3, 4, 7 terminals or blank
Available with high current terminals and heat sinks for power
electronics
For EExi to DIN EN 50020 |
 |
KO 4900 Series (PDF 116KB)
DIN-Rail Enclosures
Widths: 17.5, 35, 70mm
Up to 32 terminals
Captive plus/minus screws or cage-clamp terminals available
Connection to PCB via machine solderable terminals
Adaptable for field bus and data communications applications
DIN-rail or screw mounting housing |
 |
KU 4000 Series (PDF 117KB)
Distribution DIN-Rail Enclosures
Fits standard 45mm distribution cut-outs
Widths: 8.8, 17.5, 35, 70, 105 and 140mm
Up to 64 pressure plate terminals
Vibration proof connections
Connection to PCB via machine solderable terminals
Can be highly customised with slots, holes, terminal blanks
The range for all distribution panel applications |
 |
KO 4070 Series (PDF 90KB)
Compact DIN-Rail Enclosures
Widths: 12.5, 20, 28mm
Optional integral or opaque/transparent removable front plates
PCB mounting in three planes
Machine solderable double pins
Captive plus/minus screws |
 |
KO 4300 Series (PDF 231KB)
DIN-Rail Enclosures
Widths: 22.5, 45, 67.5, 90mm
Optional enclosure heights of 97mm or 118mm
Upto 16 terminals per 22.5mm module
Connection to PCB via high temperature machine solderable terminal
blocks, which require no masking in flow solder machines
Adaptable for field bus and data communications applications
Available with earth contact to DIN-rail
Integral screw terminals
Plug-in screw terminals
Plug-in cage-clamp terminals |
 |
KU 4059/61 Series (PDF 117KB)
DIN-Rail Enclosures
Widths: 70, 140mm
Adaptable for field bus and data communications applications
1 and 2 cassettes
Bus specific control modules for rapid equipment compatibility
All advantages of KU 4000 |
 |
KU 4100 Series (PDF 266KB)
Distribution DIN-Rail Enclosures
Widths: 17.5, 35, 52.5, 70, 105, 140mm
For building into distribution panels - 70mm depth with standard 45mm
distribution cut-out
Base plates with slide walls available for mounting of PCB assemblies |
|
|
|
|
